Introduction
Gabion boxes or กล่องเกเบี้ยน in Thai have been gaining immense popularity nowadays with modern construction as they offer sturdiness, beauty and eco-friendly. Gabion boxes are an essential skill to have whether you work erosion control, retaining walls or landscape design. Today, we are going to give you a guide on how to install gabion boxes step by step which will help keep them secure and appealing.
What are Gabion Boxes?
Wire mesh containers filled with stones, rocks or other hard materials are called Gabion boxes. These blocks are used to straighten paths around gardens, patio sub base construction and the establishment of retaining walls. Galvanized steel wire mesh is also commonly used to avoid rusting and maintain structure longevity.
Benefits of Gabion Boxes
InstallationGuideTo Install gabion boxes in construction, we first need to know why Gabions are preferred for Construction :
Durability: Due to the sturdy materials they are made from, gabion boxes tend to last a lot longer.
Sustainable: They enable natural vegetation growth which in-turn promotes a green and eco-friendly environment.
Economical: Gabion boxes are cost-effectively constructed and assembled as compared to other construction practices.
Flexibility: Gabion structures can be molded into any shape and size thus, making it a flexible solution to use for different projects.
Tools & Materials Needed
– Gabion boxes (กล่องเกเบี้ยน)
– Stones or filler material
– Wire cutters
– Gloves
– Pliers
– Shovel
– Level
Installation Step by step Guide
Step 1: Plan and Design
Every construction project starts with a plan Specify the gabion structure building that you want to use it for and measure its installation space as well. This would give you an idea about the number of gabion boxes required and how much filler material is needed.
Step 2: Site Preparation
Site preparation such as debris, vegetation removed or obstructing. Have a flat ground so that the gabion boxes will have their foundation stable. Use a shovel, if required in order to make the ground plain.
Step 3: Composite gabion boxes
Remove the gabion boxes, place them on land with a flat surface. Join the panels by connecting provided wire or tie wires with pliers. Attach all the corners securely to keep its square shape secure.
Step 4 – Positioning the Boxes
Position gabion boxes once full of rocks in your area. Align level and make sure they are straight on all sides. Accurate placement is also essential for stability and aesthetic outcome of the eventual edifice.
Step 5: Fill in the boxes
They will be filled with stones (or the selected filling media.) Arrange the stones by starting with larger ones at the bottom and gradually placing smaller stones. This just helps in a very tight and dense build. Assure that there are no spaces between the stones and distribute them evenly so they will be stable.
Step 6: Securing the Top
Fill the boxes and then attach wires or clips to the top panel. This will keep the stones from flowing out, and maintain its structure.
Step 7 – Final Touches
Inspect the gabion structure for loose wires or stones. Simply adjust what needs to be adjusted to make sure everything gets fastened down hard. Neaten with cutters and trim any loose wire.
Maintenance Tips
Maintaining your gabion structure is important for its longevity. Here are a few tips:
For Landscaping: If you are using gabion boxes for landscaping, keep the appearance by trimming overgrown vegetation.
Releveling: While many stones are packed in the sand quite well, after stepping on them repeatedly for a few seasons they may settle or shift smaller distances over time. Use refill bags as appropriate to keep the boxes intact.
Conclusion
Improving your gabion box installation skills can greatly benefit the construction projects you undertake, contributing to functional as well as aesthetic advantages. Through this step by step procedure you can install it easily without facing any difficulty. Gabion boxes, or กล่องเกเบี้ยน in Thai, can be a versatile way to protect your riverbank.